0.2 20QG095在线报价

电工钢硅钢片Electrical steel, also known as silicon steel sheet, is an indispensable metal material in the power, electronics, and military industries, and is also the largest functional material in production. It is mainly used as the iron core for various motors, generators, and transformers. Specific total loss (iron loss) is the total power consumed per unit mass of material when the magnetic polarization waveform remains sinusoidal, with a specific peak and frequency. The specific total loss is represented by the symbol P (Jm/f), in W/kg. Example: P1.5/50 represents the specific total loss at a maximum magnetic polarization intensity of 1.5T and a frequency of 50Hz. 3.2 Magnetic Polarization Q/BQB 480-20212 Magnetic polarization intensity refers to the peak magnetic polarization intensity of a specific magnetic field intensity when a sample is subjected to alternating magnetization. Its symbol is J (H), and the unit is T (Tesla). Example: J5000 represents the peak magnetic polarization intensity corresponding to a magnetic field intensity peak of 5000A/m. The material grades in this document are classified based on the nominal maximum specific total loss P1.5/50 (W/kg) at a magnetic polarization strength of 1.5T and a frequency of 50Hz, as well as the nominal thickness of the material. They are further divided into three categories based on product characteristics: ordinary type, stress relief annealing type, and high-efficiency type. Example 1: B35A210 represents a common non oriented electrical steel with a nominal thickness of 0.35mm, and the maximum nominal specific total loss value P1.5/50 is 2.10W/kg； Example 2: B35AR300 represents a stress relieved annealed non oriented electrical steel with a nominal thickness of 0.35mm, and the maximum nominal specific total loss value P1.5/50 is 3.00W/kg； Example 3: B35AH230 represents an efficient non oriented electrical steel with a nominal thickness of 0.35mm, and the maximum nominal specific loss value P1.5/50 is 2.30W/kg. Example 4: 35WW210 represents a normal type WW non oriented electrical steel with a nominal thickness of 0.35mm, and the maximum nominal specific loss value P1.5/50 is 2.10W/kg. Example 5: 35WH230 represents an efficient WH non oriented electrical steel with a nominal thickness of 0.35mm, and the maximum nominal specific loss value P1.5/50 is 2.30W/kg. The classification and code of insulation coatings shall comply with the provisions of Table 2. Table 2 Classification and Code of Insulation Coatings Type Code Characteristics of Insulation Coatings Semi organic Thin Coating A Improves Punching Performance and Has Good Weldability Semi organic Thick Coating H has Good Punching Performance and High Interlayer Resistance Semi organic Chromium Free Thin Coating K does not contain chromium and has good weldability Semi organic Chromium Free Thick Coating M does not contain chromium and has good insulation performance Semi organic Chromium Free Extreme Thick Coating J does not contain chromium and has excellent insulation performance Semi organic Chromium Free Ultra Thick Coating L does not contain chromium and has extremely high insulation performance Self adhesive Coating

电工钢硅钢片：如有，则为产品特性代表性字符，其中LM：低噪声系列（Low Magnetostriction series）NC：无涂层系列（Non-Coat series）比总损耗名义值 P1.7/50(W/kg)的 100 倍如有，则为产品特定用途，其中T：特高压变压器专用型（Special for UHV Transformer）D：配电变压器专用型（Special for Distribution Transformer）取向电工钢的类型，其中G、河北张家口本地Q：普通型（Conventional Grain-oriented grades）P、河北张家口本地QG：高磁极化强度型（High-Permeability grades）R、河北张家口本地RK：磁畴细化型（Domain-Refined grades）HS：耐热刻痕磁畴细化型（Heatproof Scribed domain-refinedgrades）（注：普通型 Q、河北张家口本地高磁极化强度型 QG、河北张家口本地磁畴细化型 RK 产品牌号可以使用至 2025 年底）材料公称厚度(mm)的 100 倍宝钢英文名称 Baosteel 的首字母（可缺省）

电工钢硅钢片半有机无铬薄涂层K H4 C-5 EC-5-P C-6涂层通常以磷酸盐无机成分为主，添加少量有机成分，不含有铬元素，杜绝了用户退火、河北张家口本地发蓝和使用过程中发生六价铬含量超标的可能性，性、河北张家口本地环保性 。性能基本接近A 涂层，绝缘性好，冲片性好，在中性气氛或弱还原性炉子气氛中，可承受的应力退火温度一般可达800℃，在退火时，层间电阻会有一定降低。半有机无铬厚涂层M --- C-5 EC-5-P C-6涂层基本情况和 K 涂层类似，膜厚增加，绝缘性更好，耐蚀性更好，冲片性也更好，焊接性略差。