想要一睹【软管泵】滑模机实体诚信经营产品的风采吗？别犹豫，我们的视频将带您领略产品的每一个精彩瞬间，从细节中感受品质，从画面中捕捉魅力。


以下是:【软管泵】滑模机实体诚信经营的图文介绍



软管泵可输送汽、液、固等三相混合物料。可以输送的介质的粘度可高1000000CP和含固量达55%的浆料。 结构紧凑，维护方便，几乎无易损件，运行成本低。专门针对输送内含大颗粒物料二设计制造，其独特的结构形状和使其能够在输送内含大颗粒物料时具有其他泵中不可比拟的优越性，经其输送的物料保持原有品质不变，是输送含颗粒物料泵的 。                           




山东济南水渠机技术创新是企业生命活力的源泉，人才是企业立足之本，是企业技术创新的核心，建立和完善技术创新机制和激励机制，鼓励和发挥技术人员的积j i性，加大 山东济南水渠机产品开发力度，豫信致诚机械设备有限公司将一如既往的坚持诚信为本，守法经营，求实创新，团结奋进的企业精神，努力开拓，锐意进取。热忱欢迎你来电、来函、来人洽谈业务，共谋发展。



众所周知软管泵在运行时，是通过一根U型附有弹性的橡胶软管来完成输送。今天小编需要强调的是，软管存放时间不宜过长，一般以一年为限。在停工期间，对装有软管的泵，若长期不用，每隔一个月需转动泵一次。以免压辊长时间压在泵管的某一处，减弱管子回弹性，影响其流量的输送。

It is well known that when the hose pump is running, it is conveyed through a U-shaped rubber hose with elasticity. Today the editor needs to emphasize that the storage time of the hose should not be too long, and it is generally limited to one year. During the shutdown period, if the pump is equipped with a hose, if it is not used for a long time, the pump needs to be rotated every other month. So as not to press the roller for a long time at a certain position of the pump tube, it will weaken the resilience of the tube and affect its flow rate.

 





工业软管泵输油不足的可能原因及解决方法齿轮泵故障排除10个隔油环齿轮泵应能连续供油，齿轮啮合重叠系数应大于1。当一对齿轮未脱离啮合时，另一对齿轮已进入啮合状态。这样，当有两对齿轮同时啮合时，两对齿轮的齿啮合线之间形成一个封闭的体积，其中部分油也被困在其中。

Possible causes and solutions for insufficient oil delivery of industrial hose pumps. Gear pump troubleshooting. 10 oil-separating ring gear pumps should be able to supply oil continuously, and the gear meshing overlap factor should be greater than 1. When one pair of gears is not disengaged, the other pair of gears has entered the meshed state. In this way, when there are two pairs of gears meshing at the same time, a closed volume is formed between the tooth meshing lines of the two pairs of gears, and part of the oil is also trapped therein.

 


点击查看豫信致诚机械设备有限公司的【产品相册库】以及我们的【产品视频库】