软管泵_路沿石成型机全新升级品质保障

对于软管泵的选择，一定要选择质量方面有保证的。不然万一因为软管泵的问题出现了差错就要花费更多的人力和物力来解决，这时候就会浪费更多的资金了。正因为这样一定要在初选择的时候选择到性价比高的。很多客户都会谈论软管泵在输送粘液方面的问题，那么今天就一起来看看软管泵输送粘液的特点吧。
(1)软管泵属容积式类，具有无机器密封、自吸本领强、自清算等特性。
(2)无泵阀，不会孕育发生密封类泵的泄汤和睦阻征象，杜绝了因走漏而造成的跑、冒、滴、漏丧失和污染，自身现场洁净。
(3)软管泵布局简朴，无叶轮、无容室等布局，顺应性强，液体、浆状和浓厚悬浮物料均可运送.分外是离弹性的软管空腔能泵吸有杂质的液体、种种纤维物体以及含粒径在软管直径1/4以下的固体料浆，并且平滑的软管内腔不孕育发生任何堵塞。容许有较大的固态物粒子。运送介质的浓度可大于70%，因此常轻便输送高浓度的物料等等。

软管泵工作原理：
一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.