联系我们
软管泵水渠成型机交货准时
更新时间：2025-01-25 12:11:28 浏览次数:28 公司名称：焦作 豫信致诚机械设备有限公司
| 产品参数 | |
|---|---|
| 产品价格 | 电议 |
| 发货期限 | 电议 |
| 供货总量 | 电议 |
| 运费说明 | 电议 |
| 规格型号 | YXRG-15 (200) |
| 流量 | 2~85立方/小时 |
| 功率 | 1.5~35kw |
| 压力 | 1Mpa~2Mpa |
| 重量 | 60~2000kg |
| 水平输送能力 | 100m |
| 垂直输送 | 3~15m |
| 软管泵最大吸程 | 8m |
| 软管尺寸 | 按规格定制 |
| 设备类型 | 小型软管泵 |
| 设备用途 | 工业软管泵、输送软管泵 |
| 工作原理 | 滚轴挤压式循环往复 |
| 参考价格 | 5000~85000 |
| 耐腐蚀性输送性能 | 可输送 |
| 食品果酱输送性能 | 可升级为不锈钢型软管泵，食品级软管 |
| 其他行业应用 | 根据输送物质类型，定制设计加工 |
| 交货周期 | 小型软管泵现货，大型定制 |
| 付款方式 | 预付30%，剩余货到付清 |
豫信致诚机械设备有限公司主营 河南安阳水渠机，为客户提供优质的 河南安阳水渠机产品、良好的技术支持、健全的售后服务以及真诚的态度均得到新老客户的一致好评。公司组织机构健全且拥有一批经验丰富、高素质、率的员工队伍，豫信致诚机械设备有限公司是河南安阳 河南安阳水渠机企业，如果您对我公司的 河南安阳水渠机产品服务有兴趣，请在线留言或者来电咨询。
多用途移动泵站的主要用途：
多用途移动泵站基于泵设计开发，大流量软管泵是市政给排水中常用的一种泵型，拥有大量的潜在用户，其产品主要用于污水、初沉污泥、浓缩污泥等的抽排输送。由于转子泵具备自吸能力强、耐干转、流量范围大、耐磨损的特点受到国内设计单位和使用单位的青睐。
The main purpose of the multi-purpose mobile pumping station:
The multi-purpose mobile pumping station is based on the design and development of a pump. The large-flow hose pump is a type of pump commonly used in municipal water supply and drainage. It has a large number of potential users. Extraction delivery. Rotor pumps are favored by domestic design units and users due to their strong self-priming ability, resistance to dry running, large flow range and wear resistance.
一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.
