cdlgp.com
产品详细介绍
单管软管泵特点:
动力消耗少，可计量输出；易损件少，更换时间短；独特无密封结构，不会产生泄露；自吸能力强，可达8米；可正反向运转，具有自清理能力；压轴采用滚动摩擦，泵腔无需加油；结构简单，操作维修方便；出口压力 可达1.6Mpa；输送高粘度、高固含量、固体颗粒、纤维物质、及其他杂志等液物料，不会产生任何堵塞。
Less power consumption, accurate metering output; less wearing parts, short replacement time; unique non-sealed structure, no leakage; strong self-priming ability, up to 8 meters; can run forward and reverse, with self-cleaning ability; final shaft Rolling friction, no need to refuel the pump cavity; simple structure, convenient operation and maintenance; outlet pressure up to 1.6Mpa; conveying high viscosity, high solid content, solid particles, fibrous material, and other magazines and other liquid materials, without any blockage .
工业软管泵不锈钢齿轮泵，可输送非润滑油饮料低腐蚀性液体，配铜齿轮可输送汽油苯等低内点液体。由于齿轮泵自吸能力差，一般是由于齿轮泵泵腔间隙较大所致。同时也是如果齿轮泵输出端没有“止回阀”，则必须是下一级齿轮泵的止回阀或控制阀。移动固定后，周围工作人员可恢复手术。
Industrial hose pump stainless steel gear pump, can transport non-lubricant beverages with low corrosive liquids, with copper gears can transport gasoline, benzene and other low internal point liquids. Due to the poor self-priming ability of the gear pump, it is generally caused by the large gap between the pump cavity of the gear pump. At the same time, if there is no "check valve" at the output of the gear pump, it must be a check valve or control valve of the next gear pump. After moving and fixing, the surrounding staff can resume surgery.
豫信致诚机械设备(嘉峪关市分公司)自成立以来，非常注重创新和研发的投入，为拓展思路，公司大量收集、整理各地需求信息外，不断为 柴油滑模机、渠道注浆泵、路沿处理机、现浇设备、防撞墙设备、浆料输送泵产品发展注入新的活力。
我们只做厂家直销！为您节省更多的钱！砍掉中间商的利润盘剥！直接给您出厂的价格！像我们这种的高质量产品，您从别的地方买，根本享受不到像我们这么优惠的出厂价格！同等的价格，我们保证质量更好！同等的质量，我们保证价格更低！
