cdlgp.com
豫信致诚机械设备有限公司主营产品： 内蒙古兴安水渠机等。我公司以合理的价格、周到的售后服务赢得了市场的信誉。我公司始终将客户的利益放在前面，深知我们的成功取决于您的成功与发展，并把这一理念贯穿于本公司从设计到售后服务的每一个环节，使我们的产品能够帮助客户提高公司效益，降低成本。我们的销售和设计人员会仔细聆听您的要求和需要，根据您的要求和需要进行设计和制造，帮助您获得满意的产品。诚挚欢迎新老朋友前来参观考察指导合作，发挥各自优势，携手共进，再创辉煌！
一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.
泵出厂时，压辊已按正常情况调整到位，如遇物料吸不上，或在泵的额定压力下，口量达不到要求，请调整压辊的偏心距，其步骤如下：
（1）先将泵壳两侧相应的圆孔有机玻璃盖板与泵出口端的长方形有机玻璃盖板打开，将转子压辊旋转至两圆孔之间，其螺栓正对圆孔，然后用套筒扳手将两端螺栓拧松，再用小圆棒或十字螺丝刀，对准标有0，1，2，3的圆孔，拨动压辊一侧内的偏心套转动，偏心套的数字越大，其压辊与泵壳间的距离越小，软管压的越紧，其调整是以转子的顶端的刻线为基准，数字越大，压的越紧，反之亦然。
（2）调整间隙时一定要注意不要压的过紧，以达到流量为准，压的越紧，对胶管的寿命影响越大。
还有一种食品级橡胶软管泵，它的内衬的橡胶层需要达到了食品卫生的要求，同时也需要符合EHEDG或者其他卫生级的要求。还有三元乙丙橡胶软管泵，这种一般适用于绝大多数腐蚀性的化学物质和无机物，内衬橡胶层由三元乙丙橡胶构成，外层也是完整的三元乙丙橡胶。这样的软管具备很强的抗化学腐蚀的特性。以及CSM软管泵，它适用于特别腐蚀性的化学介质，如：强氧化溶剂。软管的内层是CSM，外层是天然橡胶。运行温度达到85℃/185°F。
There is also a food-grade rubber hose pump. Its rubber layer must meet food hygiene requirements, and it must also meet EHEDG or other sanitary requirements. There is also a EPDM hose pump, which is generally suitable for most corrosive chemicals and inorganic materials. The inner rubber layer is composed of EPDM rubber, and the outer layer is also a complete EPDM rubber. Such hoses have strong chemical resistance. And CSM hose pump, it is suitable for particularly corrosive chemical media, such as: strong oxidizing solvents. The inner layer of the hose is CSM and the outer layer is natural rubber. Operating temperature reaches 85 ° C / 185 ° F.
