软管泵路沿石成型机免费寄样

软管泵的特性：
1. 无阀工作，流道宽。可以适应粘稠及含有颗粒浆料的泵送；
2. 定容泵送，无回流，流量稳定；
3. 容易实现流量调节，选用合适的外加部件，可以作为计量泵使用。
4. 泵送浆料只与挤压软管接触，选用合适的软管材质，可以适应各种浆料。
5. 进排口可自由转换，当有异物堵塞时，反转便可排出堵塞物；
6. 真空度高，自吸能力强；
7. 清洗方便，不需要拆卸，即可以清洗输送管路
8. 维修简便易行，易损件少（只有一根挤压软管）；               

软管泵工作原理：
一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.