软管泵路沿石成型机专业按需定制

软管泵压辊的调整
泵出厂时，压辊已按正常情况调整到位，如遇物料吸不上，或在泵的额定压力下，口量达不到要求，请调整压辊的偏心距，其步骤如下：
（1）先将泵壳两侧相应的圆孔有机玻璃盖板与泵出口端的长方形有机玻璃盖板打开，将转子压辊旋转至两圆孔之间，其螺栓正对圆孔，然后用套筒扳手将两端螺栓拧松，再用小圆棒或十字螺丝刀，对准标有0，1，2，3的圆孔，拨动压辊一侧内的偏心套转动，偏心套的数字越大，其压辊与泵壳间的距离越小，软管压的越紧，其调整是以转子的顶端的刻线为基准，数字越大，压的越紧，反之亦然。
（2）调整间隙时一定要注意不要压的过紧，以达到流量为准，压的越紧，对胶管的寿命影响越大。

软管泵用途非常广泛，市面上的诸多场合均可适用，如：污水泵井事故清空，污水泵站事故抽空，水厂的污水池、污泥池清空。市政下水道系统的污水、污泥清空抽排。工厂、罐车事故后的油品、液体物质、化学污泥等的紧急转移；事故后地表冲洗水抽吸泵。消防应急水转移；紧急供水泵站，泵内部过流部件都可配备不锈钢，数台泵车串联使用可作为临时供水泵站。军队、海军部队战备后勤泵车。

Hose pumps are very versatile and can be applied to many occasions on the market, such as: emptying of sewage pump wells, emptying of sewage pumping stations, emptying of sewage ponds and sludge ponds in water plants. Empty sewage and sludge from municipal sewer system. Emergency transfer of oil, liquid substances, chemical sludge, etc. after the accident at factories and tankers; suction pumps for flushing water on the surface after the accident. Fire emergency water transfer; emergency water supply pump station, the internal flow parts of the pump can be equipped with stainless steel, several pump trucks in series can be used as temporary water supply pump station. Military and naval forces combat readiness logistic pump truck.