取向电工钢冲片0.3 B30R100-LM

电工钢硅钢片在硅钢出现以前，铁芯一直是用工业纯铁制造的。1886年美国Westinghouse电气公司用杂质含量约0.4％的热轧低碳钢板制成变压器叠片铁芯，但低碳钢的电阻率低，铁芯损耗大，碳和氮的含量高，磁时效严重。1902年德国古姆利奇发现添加硅能使铁的电阻率增高，涡流损耗和磁滞损耗降低，磁导率增高，磁时效现象减轻硅钢主要用于制备各种电动机、山西晋中发电机和变压器等电力设备的铁芯，是电力、山西晋中电子和军事工业中必不可或缺的金属功能材料，也是电力设备提率、山西晋中降低能耗的关键材料。电工钢作为用量 的软磁合金，广泛应用于实体经济中的各个方面，提高其整体性能和制造水平在国民经济发展中具有非常重要的作用和意义。

电工钢硅钢片Electrical steel, also known as silicon steel sheet, is an indispensable metal material in the power, electronics, and military industries, and is also the largest functional material in production. It is mainly used as the iron core for various motors, generators, and transformers. Specific total loss (iron loss) is the total power consumed per unit mass of material when the magnetic polarization waveform remains sinusoidal, with a specific peak and frequency. The specific total loss is represented by the symbol P (Jm/f), in W/kg. Example: P1.5/50 represents the specific total loss at a maximum magnetic polarization intensity of 1.5T and a frequency of 50Hz. 3.2 Magnetic Polarization Q/BQB 480-20212 Magnetic polarization intensity refers to the peak magnetic polarization intensity of a specific magnetic field intensity when a sample is subjected to alternating magnetization. Its symbol is J (H), and the unit is T (Tesla). Example: J5000 represents the peak magnetic polarization intensity corresponding to a magnetic field intensity peak of 5000A/m. The material grades in this document are classified based on the nominal maximum specific total loss P1.5/50 (W/kg) at a magnetic polarization strength of 1.5T and a frequency of 50Hz, as well as the nominal thickness of the material. They are further divided into three categories based on product characteristics: ordinary type, stress relief annealing type, and high-efficiency type. Example 1: B35A210 represents a common non oriented electrical steel with a nominal thickness of 0.35mm, and the maximum nominal specific total loss value P1.5/50 is 2.10W/kg； Example 2: B35AR300 represents a stress relieved annealed non oriented electrical steel with a nominal thickness of 0.35mm, and the maximum nominal specific total loss value P1.5/50 is 3.00W/kg； Example 3: B35AH230 represents an efficient non oriented electrical steel with a nominal thickness of 0.35mm, and the maximum nominal specific loss value P1.5/50 is 2.30W/kg. Example 4: 35WW210 represents a normal type WW non oriented electrical steel with a nominal thickness of 0.35mm, and the maximum nominal specific loss value P1.5/50 is 2.10W/kg. Example 5: 35WH230 represents an efficient WH non oriented electrical steel with a nominal thickness of 0.35mm, and the maximum nominal specific loss value P1.5/50 is 2.30W/kg. The classification and code of insulation coatings shall comply with the provisions of Table 2. Table 2 Classification and Code of Insulation Coatings Type Code Characteristics of Insulation Coatings Semi organic Thin Coating A Improves Punching Performance and Has Good Weldability Semi organic Thick Coating H has Good Punching Performance and High Interlayer Resistance Semi organic Chromium Free Thin Coating K does not contain chromium and has good weldability Semi organic Chromium Free Thick Coating M does not contain chromium and has good insulation performance Semi organic Chromium Free Extreme Thick Coating J does not contain chromium and has excellent insulation performance Semi organic Chromium Free Ultra Thick Coating L does not contain chromium and has extremely high insulation performance Self adhesive Coating

电工钢硅钢片半有机无铬薄涂层K H4 C-5 EC-5-P C-6涂层通常以磷酸盐无机成分为主，添加少量有机成分，不含有铬元素，杜绝了用户退火、山西晋中本地发蓝和使用过程中发生六价铬含量超标的可能性，性、山西晋中本地环保性 。性能基本接近A 涂层，绝缘性好，冲片性好，在中性气氛或弱还原性炉子气氛中，可承受的应力退火温度一般可达800℃，在退火时，层间电阻会有一定降低。半有机无铬厚涂层M --- C-5 EC-5-P C-6涂层基本情况和 K 涂层类似，膜厚增加，绝缘性更好，耐蚀性更好，冲片性也更好，焊接性略差。